Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Kent
If your garage door in Kent has reached the point where repairs cost more than they’re worth, a new door is the honest answer, and it’s usually more affordable than homeowners expect. For a lot of Kent homes we’re talking about doors from the 1970s and 80s that were installed when the house was built, and they’ve been carrying the same original springs and opener ever since. We know this city block by block, from the wet valley floor to the hillside subdivisions east of the valley, and we can tell within a few minutes whether the door you have is worth saving or ready to retire. Call (877) 792-5887 and we’ll set up a free measure on a new door for your Kent home.
Why Kent Homeowners Call Auburn Garage Door Repair Pros for Garage Door Installation
We’re a garage door specialist, not a handyman who adds doors to a long list of trades, and that shows up most on the harder jobs – legacy hardware, discontinued profiles, doors that have been sagging for years. When a Kent homeowner calls about a tired old door, we can talk through the door styles and hardware that make sense instead of guessing.
We work across the full roster of major residential brands, including Clopay, Amarr, Chamberlain and Genie, so the door and opener we recommend fit the garage you actually have. If your existing opener is modern enough, we can often pair it with a new door and keep the electronics you’ve already paid for. One company handles the measure, the door install, the spring sizing, and the opener work – no second crew, no waiting on a referral. Our technicians have up to 10 years of experience, and installing a door properly means the balance, the spring tension, and the track all have to be right. That’s a job for a technician, not a weekend attempt. We serve Kent and the surrounding area, and a written estimate goes out before anything is ordered.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Kent
Most door work in Kent falls into one of a handful of categories. Here’s how each one usually goes.
New Door Installation in Kent
A full new door install replaces the door, the springs, and the track in one job. We measure your opening, match the door to your garage and house style, and quote a written price before the order goes in. In Kent, that often means deciding between a like-for-like replacement and an upgraded insulated door, and we’ll walk you through both with real numbers.
Single Car Door Installation in Kent
Kent’s 1960s to 80s tract housing leans toward one-car garages, many still holding the original wood-panel or early steel door. A single door is simpler and usually cheaper to install than a double, but the hardware still has to be matched to the door’s weight and balance. A properly sized spring is the difference between a smooth door and an opener that strains from day one.
Double Car Door Installation in Kent
East Kent added a lot of two-car subdivisions in the 1990s and 2000s with insulated steel sectional doors. Replacing a double door is a bigger job because the load is heavier – a double door typically weighs 150 to 350 pounds, and the springs, not the opener, carry that weight. We size the springs for the actual door so the opener you have keeps up.
Custom Garage Door Installation in Kent
Some Kent homes don’t fit a standard opening, whether it’s an odd width on an older house or a style match that’s hard to find. Custom doors take longer to order, but the fit and balance are what matter, not the speed. We’ll go over the options and give you a written price before committing to anything.
Steel and Wood Garage Doors
Steel doors hold up well against damp and are the standard choice in Kent’s newer subdivisions, though north-facing steel panels can rust along the bottom section in a humid valley lot. Wood doors look right on older homes but swell and rot at the bottom panel when the garage stays damp for months. Both are fine choices – it’s a question of the garage and how it sits.
Trusted Brands We Service in Kent
We work on Clopay and Amarr doors and on Chamberlain and Genie openers, and we know how each one is built and how the hardware fits together. The point isn’t a big brand list – it’s that the door and opener you pick are matched to a spring rated for the door’s weight and a track that lines up with the opening. When a Kent home still has an old door with discontinued hardware, we tell you what will and won’t fit instead of forcing a part that almost works. From the first measure to the finished install, one company handles the job. The parts are ordered for your brand and your door, and the written estimate sets the final price.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Kent Homes
- Swollen wood panels and dragging seals on valley-floor doors. Homes in 98031 and 98032 sit in fog pockets where winter damp keeps garage interiors humid for months, so a legacy wood-panel door swells and the bottom seal drags or rots against the apron. That’s usually the point where a retrofitted door makes more sense than another repair.
- Original springs and openers past their service life. Many Kent doors from the 1960s to 80s have never had a new spring or opener, and parts for the old hardware are getting hard to find. When that happens, the decision shifts to repair or replace, and we’ll tell you honestly which one is worth it.
- Frozen bottom seals after a valley cold snap. Fog-dampened seals can ice to the concrete apron when temperatures drop, and the door tears or jumps its track when the opener pulls against the ice. Clearing or replacing a worn seal is a cheap fix that prevents a more expensive one.
- Strained openers on east-hill doors. Newer insulated steel sectional doors in 98042 and 98030 often get blamed for an opener that won’t lift, when the real issue is a tired spring. The springs carry the door; the opener only moves it. We check the spring before recommending a new opener.
Pricing for Garage Door Installation in Kent, WA
What a new door costs in Kent depends mostly on size, material, and whether you’re replacing the opener or track too. Here are typical estimated ranges for the work, and the written estimate you get sets the final price. A typical new door installation in Kent runs $700 to $2,200, with a single door toward the lower end and a double or custom door toward the top. If you keep the existing door and just swap out a section or two, panel replacement is $250 to $500. A new opener, if you need one, runs $250 to $550 on top of the door. Spring repair when reusing a door is $180 to $340 for one spring, and a matched pair costs about twice that, since they’re usually replaced together. Track realignment is $120 to $240. Estimates are free and there’s no charge for a measure, so call (877) 792-5887 for an exact number on your Kent garage.
| Service | Typical Estimated Range in Kent |
|---|---|
| New Door Installation | $700 – $2,200 |
| Panel Replacement | $250 – $500 |
| Spring Repair (one spring) | $180 – $340 |
| Opener Installation | $250 – $550 |
| Track Realignment | $120 – $240 |
We Also Serve Cities Near Kent
We work throughout Kent and the neighboring towns as well, including Covington, Des Moines, Federal Way, and Auburn. If your home is in one of these areas and you’re thinking about a new door, the same measure-and-estimate process applies. Our garage door installation covers all of them the same way we handle a job in Kent. Call and we’ll set up a time.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Kent
Replacing is usually the better call once the bottom panels have swollen and the seal keeps dragging, because repairing a door with discontinued hardware becomes an endless series of patches. If the panels are still sound and only the seal or a spring has gone, a repair is worth doing. It comes down to whether the door is warped beyond safe travel, and a measure confirms that. Call (877) 792-5887 for a free look – estimates cost nothing.
Yes, the rating matters a great deal – the spring has to be rated for the actual weight of the door, not sized by guess. A double insulated steel door can weigh 150 to 350 pounds, and the springs carry that load while the opener only moves it. A spring rated too light will fail early and strain the opener. We size the spring to the door at the measure. Call (877) 792-5887 for an exact quote on your Kent double door.
It froze because the fog-dampened bottom seal iced to the concrete apron after a valley cold snap – a problem the drier east-side hills almost never see. The door tears or jumps track when the opener pulls against the ice. Replacing a worn seal before winter is the cheap fix. Call (877) 792-5887 and we’ll take a look at the seal and tracks.
Often it isn’t the opener at all – it’s a tired spring on the heavier insulated steel door, and the opener is doing work it shouldn’t have to. The springs carry the door’s weight; the opener only moves it. We test the balance and the spring before recommending a new opener. Call (877) 792-5887 for a free diagnosis and estimate.
Yes, in many cases you can – if the opener tests clean and the photo-eye sensors are working, we can often pair the new door with your existing opener and keep the electronics you already have. That keeps the cost down and gets the door working properly. We’ll tell you at the measure whether keeping it makes sense. Call (877) 792-5887 to book a free measure.
Ready for a new door in Kent? Call (877) 792-5887 for a free measure and a written estimate. We’ll look at your door, your springs, and your opener, then quote a price that’s agreed before any work starts. Estimates are free, and we work with you on a time that fits. Whether it’s a valley-floor retrofit or an east-hill install, one company handles it from the first call to the finished door.
Written by the team at Auburn Garage Door Repair Pros.